3D Exercise 156

Exercise 156

Features used to make this exercise:

In this CAD tutorial we'll use the features: 

1. Extrude: Pushes or pulls a flat 2D sketch in a straight line to add or remove material.

2. Hole: Creates precise, standard engineering holes (like tapped or clearance holes) directly into a solid part.

3. Create a new plane: Establishes a custom flat reference surface used for sketching or as a boundary for other features.

4. Plane at angle: Creates a new flat reference surface that is rotated at a specific angle around a selected edge or axis.

5. Rib: Quickly adds a thin structural support wall (like a web or gusset) to reinforce a solid body.

6. Mirror: Creates an exact, symmetrical copy of a sketch, feature, or solid body across a selected center plane or face. Fillet: Rounds off sharp edges to create a smooth, curved transition.

All dimensions are in mm/g/s/ISO  

#Fusion360 #Solidworks #Inventor #Autocad #FreeCAD

2D Sketch

Sketch 156

Tip: Subscribe to the channel for more tutorials like this.

Tutorial In Autodesk Fusion: https://youtu.be/ijXsgkISWyY

Tutorial in FreeCAD: