Mechanical Movement 21 — Two-Pulley Chain

How do two pulleys give three to one?
Mechanism No. 21 from 507 Mechanical Movements, one of four pulley arrangements (Nos. 19–22). The upper pulley is fixed; the lower pulley hangs on cord 1, which runs from the load up over the fixed pulley. Cord 2 runs from the load up over the lower pulley and down to your hand. Both parts of cord 2 pull the lower pulley down, so cord 1 is twice as tight as your pull, and since both cords end on the load it hangs on 2 + 1 = 3 times your pull.
How it works, step by step
1. Two cords to the load
Cord 1 runs from the load over the fixed pulley and holds the lower pulley; cord 2 runs from the load over it to you.
2. The lower pulley doubles
Both parts of cord 2 pull the lower pulley down, so cord 1 carries twice your pull: 396 N ideal.
3. Three shares
The load hangs on 2 + 1 = 3 times your pull: 215 N for 589 N.
4. Three times the rope
44 cm of cord for 15 cm of lift; the lower pulley drops as the load rises.
The key idea
F ≈ W / 3 — Cord 1 carries twice your pull and both cords end on the load: 2 + 1 = 3 shares.
Tying both cords to the load lets the lower pulley’s doubled pull lift too: 2 + 1 = 3 with two pulleys.
Model and assumptions
Mechanical advantage taken from the geometry: 3 (= 2² − 1). Brown’s rule for Nos. 19–22 gives 2ⁿ when the cords are tied to a fixed point; here they are tied to the load. As the load rises 1 cm the lower pulley drops 1 cm. Friction: lifting needs about W / (3 η²).
Frequently asked questions
Why 3 : 1 with two pulleys?
Cord 1 carries twice your pull and cord 2 carries your pull; both end on the load, so 2 + 1 = 3.
Which pulley moves?
The lower one, which drops as the load rises.
How does it compare with Movement 22?
No. 22 ties cords to the ceiling and reaches 2ⁿ; tying them to the load gives 2ⁿ − 1.
Part of the 507 Mechanical Movements series
This is Movement No. 21 from Henry T. Brown’s 507 Mechanical Movements (1868), redrawn and simulated by BCRUZ.




Comments