top of page

Mechanical Movement 24 — Spur Gears

3 hours ago
2 min read
Mechanical Movement 24 — Spur Gears
Mechanical Movement 24 — Spur Gears

How do two spur gears trade speed for torque?

Mechanism No. 24 from 507 Mechanical Movements: spur gears. Straight teeth on two parallel shafts mesh so that the pitch circles roll on each other without slipping. Both wheels have the same speed at the pitch circle, so the larger wheel turns more slowly in proportion to its number of teeth, in the opposite direction, and with proportionally more torque. Here a 26-tooth pinion drives a 36-tooth wheel.



How it works, step by step

1. Two spur gears

Straight teeth on parallel shafts: a 26-tooth pinion drives a 36-tooth wheel.

2. Rolling pitch circles

The pitch circles roll without slipping: both move at 0.16 m/s where they touch.

3. Slower, opposite

The wheel turns 21.7 rpm against 30.0 rpm, the other way round: n₂ = n₁ × 26 / 36.

4. More torque

What is lost in speed is gained in torque: 20 N·m in, 27.1 N·m out (98 % efficient).

The key idea

n₂ = n₁ · z₁ / z₂ — Pitch circles roll without slipping, so speed falls and torque rises in the ratio of the teeth (26 : 36).

Teeth force the pitch circles to roll together, so speed falls and torque rises in the ratio of the teeth.

Model and assumptions

Module 4 mm: pitch diameters 104 mm and 144 mm, centre distance 124 mm. Speed ratio n₂ / n₁ = z₁ / z₂ = 26 / 36; torque ratio z₂ / z₁ with about 98 % mesh efficiency. Pitch-line speed v = ω₁ r₁ = ω₂ r₂.

Frequently asked questions

How do you calculate a spur gear ratio?

Divide the teeth: n₂ = n₁ × z₁ / z₂.

Why do meshing spur gears turn opposite ways?

Their teeth push each other at the contact point, like two wheels rolling on each other.

What is the pitch circle?

The imaginary circle on which the two gears roll without slipping.

Part of the 507 Mechanical Movements series

This is Movement No. 24 from Henry T. Brown’s 507 Mechanical Movements (1868), redrawn and simulated by BCRUZ.

Comments


bottom of page